CTC
Connection Technology Center, Inc. – CTC – offers the widest variety of high quality accelerometers, vibration sensors cables and connectors for industrial use in condition monitoring and predictive maintenance applications. It’s an industry leading product portfolio supported by an unconditional lifetime warranty on all CTC Industrial accelerometers and vibration analysis.
Showing 1–24 of 56 results
-
100 mV/g Test and Measurement Accelerometers
100 mV/g Test and Measurement Accelerometers
General Purpose Test & Measurement Accelerometer
Lightweight Titanium Case
10kHz (±5%) Frequency ResponseManufactured by
-
10 mV/g Test and Measurement Accelerometers
10 mV/g Test and Measurement Accelerometers
General Purpose Test & Measurement Accelerometer
Lightweight Titanium Case
10kHz (±5%) Frequency ResponseManufactured by
-
Test and Measurement Cabling Options
Test and Measurement Cabling Options
Application General Purpose Test & Measurement
Cable Construction Coaxial
Shielding Method Silver Plated Copper Braid
Temperature Range -94 to 392°F (-70 to 200°C)
Cable Diameter 0.072 in (1.83 mm)
Center Conductor 30 AWG Stranded
Bend Radius 1.0 in (25 mm)
Capacitance 29 pF/ft
Shield Coverage 95% Braid MinimumManufactured by
-
Test and Measurement Connectors
Test and Measurement Connectors
For use with Test and Measurement Accelerometers
Coaxial Cable Connector
329°F (165° C) Max TemperatureManufactured by
-
Test and Measurement Connector Kits
Test and Measurement Connector Kits
Product Features
For use with Test and Measurement Accelerometers
Coaxial Cable Connector
329°F (165° C) Max TemperatureManufactured by
-
Test and Measurement Mounting Hardware
Test and Measurement Mounting Hardware
Product Features
10-32 Tapped Hole
1/2″ Hex
Anodized aluminum hardcoat for electrical isolationManufactured by
-
100 mV/g Standard Size Accelerometers
100 mV/g Standard Size Accelerometers
Product Features
Affordably Priced, Hermetically Sealed Sensors
Perfect for Thousands of Applications
100 mV/g Sensitivity
± 50 g, peak Dynamic Range
Standard 2 Pin MIL Connection or IntegralManufactured by
-
100 mV/g Compact Size Accelerometers
100 mV/g Compact Size Accelerometers
Product Features
High Performance in an Affordable Compact Sensor
Very Low Noise and Superior RF Immunity
100 mV/g Sensitivity, ± 10%
± 80g Dynamic Range
Standard 2 Pin MIL Connection on non integral optionsManufactured by
-
100 mV/g Small Size Accelerometers
100 mV/g Small Size Accelerometers
Product Features
Mini Industrial Accelerometer, Great for Hard-to-Reach Locations
Mini, Easy to Manage Size
2 Pin Mini-MIL Connection
±15% SensitivityManufactured by
-
50 mV/g High G Industrial Accelerometers
50 mV/g High G Industrial Accelerometers
Product Features
50 mV/g General Purpose Sensor
Excellent for Higher g Applications
±100 g, Dynamic Range
50 mV/g, ±10% Sensitivity
1,0-12500 Hz (60-750,000 CPM)
±15% SensitivityCableManufactured by
-
10 mV/g High G Accelerometers
10 mV/g High G Accelerometers
Product Features
Very High 500g Accelerometer
High Amplitude
1 – 15000 Hz (60-900,000 CPM) Frequency Response when Stud Mounted
10 mV/g ±10% Sensitivity
± 500 g Dynamic RangeManufactured by
-
Low Frequency Accelerometers
Low Frequency Accelerometers
Product Features
Designed for low speed Rotors, Main Bearings, and Gear Box Inputs, but can also be used for High Frequency Detection.
Can be used with any application that requires low and high frequency measurements.
500 mV/g Sensitivity, ±10% Sensitivity
0.1 Hz for Low Frequency Measurements
10,000 Hz for High Frequency DetectionManufactured by
-
Biaxial/Triaxial Accelerometers
Biaxial/Triaxial Accelerometers
Product Features
Low Cost Triaxial Sensor
Speeds Data Collection
±15% Sensitivity
Collect 3 Channels of Data Simultaneously
Must Use J4A, J4C, J4N, or J4P Connectors and CB105, CB117, CB119 or CB218 Cables.Manufactured by
-
Wind Turbine Accelerometers
Wind Turbine Accelerometers
Product Features
Designed for Low Speed Rotors, Wind Turbine Main Bearings, and Gear Box Inputs
500 mV/g Sensitivity ± 10%
0.1 Hz for Low Frequency Detection
10,000 Hz for High Frequency DetectionManufactured by
-
Molded Sensors
Molded Sensors
Lightweight, Molded Accelerometer; 100 mV/g Top Exit, Integral Cable, 10-32 Mounting, General Purpose
Product Features
Nylon Overmolded Accelerometer
IP68 Rated
Low CostManufactured by
-
Ultrasound Sensors
Ultrasound Sensors
Ultrasound Sensor, 100mV/g, Top Exit, 2 Pin mini-MIL Connector, 1/4-28 Mounting
Product Features
High Frequency Ultrasound Accelerometer
High Amplitude Resonance Peak for Stress Wave
Measurement TechniquesManufactured by
-
Rare Earth Magnetic Bases, Flat Surface
Rare Earth Magnetic Bases, Flat Surface
Product Features
Durable 17-4 Stainless Steel case and mounting stud
High Strength Neodymium Iron Boron magnet optimizes pull strength and performance
Maximum frequency response up to 10 kHz when paired with MH133-1A mounting targetManufactured by
-
Rare Earth Magnetic Bases, Multi-purpose
Rare Earth Magnetic Bases, Multi-purpose
Durable 303 Stainless Steel case and mounting stud
High strength Neodymium Iron Boron magnet optimizes pull strength and performance
2 rail mounting system allows measurements on flat and curved surfacesManufactured by
-
Accelerometer Installation Tool Kit
Accelerometer Installation Tool Kit
Accurate”: Drills a pilot hole for a 1/4 – 28, 10 – 32 or M6 x 1 threads perpendicular to a milled face, in the same operation.
Fast: Mill and drill in the same operation.
Reliable: High speed steel and carbide tipped versions available.
Economical: High speed steel models may be re-sharpened for extended tool life. Resharpen to a 4° top bevel.
Versatile: For use with portable hand drills.Manufactured by
-
Adhesive Mounting Pads
Adhesive Mounting Pads
Mounting disk, 1″ (25 mm) diam, 1/4-28 integral mounting stud
Product Features
Provides a consistent location for a permanent vibration reading location
Adhesive Mount to avoid drilling and tapping
Textured surface on bottom of pad for adhesive bondingManufactured by
-
Adhesives
Adhesives
Industrial Grade Adhesives for Permanently Installing Mounting Pads
Field tested under the most adverse and hazardous conditions.
All of our adhesives
have been proven to withstand the demands of their specific applications..Manufactured by
-
Specialty Mounting Adapters
Specialty Mounting Adapters
Product Features
Explosion Proof, Dust-Ignition Proof Elbow for use with Threaded Metal Conduit
-Screw-on cover for easy of installation and removal
-Makes 90° bend in conduit runsManufactured by
-
Mounting Studs
Mounting Studs
MH144-2A
Triaxial Mounting Block
with five 1/4-28 Mounting Holes
& one M6 captive bolt
Button head grease fitting adapter
1/8-27 NPT mounting thread
MH145-1B
Convert Measurement Point into Triaxial Measurement Point. This low cost option allows you to position tgrease the .Manufactured by
-
High Frequency Magnet System
High Frequency Magnet System
Product Features
Robust stainless steel case magnets make these units ideal for high volume route measurements.
The use of a mounting target will enhance the accuracy of high frequency data, ensure consistent measurement locations, and repeatable trending data.
The mounting target is supplied with a tapped hole, to allow the opportunity for permanently mounting an accelerometer, should it become necessary.
Protective cap covers are supplied to keep paint and unwanted debris away from the magnet target.Manufactured by
