Dimetix Accessory

500590 Starter Kit DLS/FLS

The starter kit accessories helps to familiarize with DLS Distance-Laser-Sensors. The Kit includes all necessary Components to operate a DLS Sensor.
Consisting of:

• RS-232 configuration cable (500200)
• Power Supply (In: 100 … 240 VAC, 0.6A Out: 24 VDC, 0.75 A)
• DLS Utility Software
• DLS-C Manual

Not usable for devices with extendet temperature range (heater)

FLS/DLS Distance Laser Sensor must be ordered separately

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500592 Starter Kit EDS-C

The starter kit accessories helps to familiarize with EDS Distance-Laser-Sensors. The Kit includes all necessary Components to operate a EDS Sensor.
Consisting of:

• RS-232 configuration cable (500204)
• Power Supply
• EDS-C Utility Software

EDS-C Laser Distance Sensor must be ordered separately

• EDS-C – the simple and economic solution

500213 Alignement Jig

Adjusting angle: ±7° in two directions
Material: stainless steel (V2A)
Recommended for distances up to 50m
Applicable for EDS/DLS/FLS

• EDS-C – the simple and economic solution
• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500113 Reflective Plate 210 x 297 mm

Reflective plate 210 x 297 mm (orange)
applicable distance range DLS: from about 25m to 500m
applicable distance range FLS: from about 0.5m to 500m

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy
• D-Series

500114 Reflective Foil 600 x 1200mm

Reflective foil 600 x 1200 mm (orange)
for self fitting, applicable distance range
DLS: from about 25m to 500m
FLS: from about 0.5m to 500m

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy
• D-Series

500001 Calibration certificate

for new measuring devices FLS / DLS
(must be ordered together with the device)

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy
• D-Series

500002 Recalibration Ceritficate

Recalibration with calibration certificate
for used measuring devices DLS/FLS

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy
• D-Series

500294 Cable Gland

Cable Gland M16x1.5

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500293 Ferrite for Cable Diameter 13mm

Ferrite for cable diameter 13 mm

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500292 Ferrite for Cable 10mm

Ferrite for cable diameter 10 mm

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500291 Ferrite for Cable 6.5mm

Ferrite for cable diameter 6.5 mm

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500215 Numeric Digital Display

Numeric digital display 6 digits
Char. height 14mm; LED red; RS-232/485; Reading distance: 1…5m
applicable for DLS/FLS

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy
• D-Series

500214 DIMS Profibus external Interface

Profibus/RS-422 converter, IP20 module, mountable on 35 mm DIN rail
applicable for DLS/FLS

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy
• D-Series

500210 Converter RS-232 to RS-422

IP20 module, mountable on 35 mm DIN rail
applicable for DLS/FLS

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy
• D-Series

500209 Converter USB to RS-232

USB to serial port converter. It provides a connection from the sensor to the USB port of a PC, notebook or handheld computer device.

• EDS-C – the simple and economic solution
• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy
• D-Series

500200 RS-232 Configuration Cable FLS/DLS

RS-232 Configuration cable DLS/FLS
Length = 3m, with 15 pin connector IP65 and 9 pin connector
This RS232 configuration cable is made to connect Laser Distance Sensor DLS/FLS to the PC and a power supply for easy configuration.

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500204 RS-232 Configuration Cable EDS-C

Length = 3m, with M12 5 pin connector IP65 and 9 pin D-sub connector
applicable for EDS

• EDS-C – the simple and economic solution

500205 Connection Cable EDS-C

Connection cable EDS
Length = 5m, with M12 15 pin connector IP65, other side open end

• EDS-C – the simple and economic solution

500290 Connector straight IP65 for 15 Pin D-Sub Connector

cable diameter range 6 to 10 mm
applicable for DLS/FLS

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500253 Connector 90° IP65 for 15 Pin D-Sub Connector

Connector 90° IP65 for 15 pin D-Sub connector
maximum cable diameter is 5 mm
applicable for DLS/FLS

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500251 Cover IP65 for D-Sub Connector

Cover IP65 for 15 pin D-Sub connector
applicable for DLS/FLS

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500203 RS-422/SSI Connection Cable FLS/DLS

RS-422 Connection cable DLS/FLS
Length = 5m, with 15 pin connector IP65

Special lenghts on request. Please contact us.

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy

500202 AO / DO Connection Cable FLS/DLS

AO/DO Connection cable
Length = 3m, with 15 pin connector IP65
applicable for DLS/FLS

• DLS-C – for precise measuring in extreme situations
• FLS-C – for fast measuring and unique accuracy