Ultrasonic Flow Meters

Ultrasonic Flow Meters 

Measure flow from outside a pipe. The Ultrasonic Flow Meters Greyline DFM 5.1 is designed for “difficult liquids” that would damage regular flow meters – wastewater, slurries, sludge, chemicals, viscous liquids, and abrasives. There is no obstruction to flow and no pressure drop. The non-intrusive, clamp-on ultrasonic sensor fits any pipe 1/2″ (12.5 mm) Inside Diameter or larger. The electronics/display enclosure can be mounted nearby.

Manufactured by

CTH Industrial Controls can provide you with service and start up assistance for Greyline Instruments.

Category:

Description

Accurately measure the flow rate of relatively clean, non-aerated liquids like potable water, raw water, cooling water, de-ionized or reverse-osmosis water, oils and chemicals in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display, along with total volume, signal strength, relay status, and other diagnostic values. Use the built-in control relays as flow alarms or volume totalization. Connect the isolated 4-20mA output to PLC’s or controllers. A 128MB data logger is standard, capable of capturing up to 26 million data points. Optional MODBUS RTU via RS-485 available for connection to automation system.

 

  • Non-Contacting Ultrasonic Sensor
  • Accurate and Verifiable
  • Built-in 2-million point Data Logger and Windows Software
  • USB Outputs to Flash Memory Sticks
  • Isolated 4-20mA/0-5V Output
  • 2 Programmable Control Relays
  • Simple 5-key Calibration with Language Selection

 

  • Clamp-on Ultrasonic Transducer
  • Handheld Meter with large backlit LCD Display and Totalizer
  • Internal Battery and/or AC Powered
  • Built-in 5-Key Calibrator
  • 300,000 point Data Logger
  • USB Output and Windows software
  • 4-20mA Output
  • Rugged, watertight Carry Case

 

 

  • Flow Control from the Outside of Metal or Plastic Pipes
  • 5 amp DPDT Control Relay
  • Adjustable ON/OFF Set-Points
  • Hi or Lo Flow Alarm Mode
  • Adjustable Time Delay
  • Relay Status LED
  • Flow Rate LED bargraph

SFM 6.1 Ultrasonic Slurry Flow Meter

  • Optimized for slurries
  • Easy, Intuitive Set-Up
  • 5 Button Menu System
  • Isolated 4-20 m A Output
  • Up to 6 Control Relays
  • Optional Built In Data Logger

TTFM 6.1 Transit Time Flow Meter

  • Enhanced Performance
  • Wide Range of Applications
  • Easy to Install and Configure
  • Non-Contacting Clamp-on Ultrasonic Transducers
  • Works on a Large Variety of Pipe Materials and Sizes
  • Large Backlit Flow Rate Display and Totalizer
  • Isolated 4-20mA Output
  • 2 Programmable Control Relays
  • Optional MODBUS® RTU or HART Output
  • Application Optimization Available
  • 128MB Data Logger

 

  • Non-Contacting Clamp-on Ultrasonic Transducers Works on Metal and Plastic Pipes
  • Large Backlit Flow Rate Display and Totalizer
  • Isolated 4-20mA Output
  • Built-in 5-Key Calibrator
  • 300,000 point data logger

 

electromagnetic with no moving parts
simplified hot tap insertion design
installs in 3-72″ (80-1800 mm) diameter pipes
selectable 4-20mA, 0-5V or 0-10V output
0-500Hz frequency output
scalable pulse output

 

 
Click here for more information

 

 

 

Reviews

There are no reviews yet.

Be the first to review “Ultrasonic Flow Meters”

Your email address will not be published. Required fields are marked *