SWR engineering

ENVEA – SWR engineering manufactures an unrivaled range of monitors for powder, granulates and dust to meet the continued demands of industrial process to better understand and control their processes to help provide increases in efficiency and product quality.
With this variety of products, a wide range of measuring and monitoring tasks can be solved and real added value for the user can be provided.

Also, ENVEA – SWR engineering SWR wants to be a contact and problem-solver for customers who process and handle solids in their processes and procedures. Their products are used in the processing of raw materials as well as in production and environmental protection. Their objective is to facilitate your business with good solutions that are as simple as possible.

Showing all 18 results

12/24/48/All
  • Read more

    Fall through measurement of high mass flow rates

    Fall through measurement of high mass flow rates
    For measurement of high mass flow rates for dry solids from the exit of pre-feeding devices,
    e. g. screw conveyors, air slides, rotary valves, bucket elevators, etc.

    ● Most non-metallic solids can be measured
    ● Can be installed on round pipes or ducts
    ● No real upper limit of mass flow
    ● Maximum pressure 10 bar
    ● Dust-tight

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    SolidFlow 2.0 – Dry bulk solids measurement

    SolidFlow 2.0 – Dry bulk solids measurement
    The measuring system to easily measure the mass flow
    of solids

    • Can be used in free fall and in pneumatics
    • Simple retrofitting using a welding socket
    • ATEX-certified
    • Almost all types of dust, powder and granules can be measured
    • No installations in the material stream
    • up to 20 t/h
    • Measuring principle: Microwave
    • Online flow metering
    • Throughput measuring up to 20 t/h
    • Active roping compensation for highest reliability

     

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Flow metering in dense-stream

    Flow metering in dense-stream
    The measuring system for continuous flow metering in dense-stream conveying
    and high levels of throughput

    • Reliable flow metering in pneumatic dense-stream
    • Unlimited throughput volumes can be measured
    • optionally pressure-resistant up to 25 bar
    • The installation creates no obstacle in the profile, hence no dead spots in which residue can form
    • Measurement independent of the flow speed of the material
    • Simple retrofitting
    • Maintenance-free

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Flow metering in dense-phase conveying

    Flow metering in dense-phase conveying
    The measuring system for continuous flow measurement for high-pressure dense phase-conveying

    • Reliable flow metering in pneumatic dense-phase
    • Pressure-resistant up to 110 bar
    • The installation creates no obstacle in the profile, hence no dead spots in which residue can form
    • Maintenance-free
    • Contactless measuring procedure (no mechanics)

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Continuous flow measurement at low solid/air ratios

    Continuous flow measurement at low solid/air ratios
    Measuring powder flows in transport lines with very low material concentrations.

    • In pneumatic applications for material flow rates of up to 100 kg/h
      (depending on application)
    • In free-fall with a drop speed of at least 2 m/s (approx. 25 cm drop height)
    • In cases where dust measuring instruments cannot cope and flow rate
      measuring instruments are overspecified

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Online humidity measurement

    Online humidity measurement
    The microwave sensor for continuous humidity measurement
    in dry bulk solids

    Simple retrofitting for measurement in container outlets, conveyor screws, on conveyor belts, slides etc.

    • Humidity ranges 0 … 65 % (depending on material)
    • Measurement accuracy 0.1 %
    • Online humidity measurement
    • Independent of the material flow
    • Temperature-resistant up to 120 °C
    • ATEX-certified
    • Recording of surface humidity and capillary humidity

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Category:
  • Read more

    Dusty – Filter damage monitoring

    Dusty – Filter damage monitoring

    Dusty filter damage monitoring is a filter monitor that works on a triboelectric basis

    • Detects all dust types
    • Electronic alarm output
    • Usable in clean gas and dust channels
    • Very simple and fast retrofitting
    • Immediate detection of filter damages
    • Uncomplicated commissioning (Plug & Play)
    • Excellent price/performance ratio
    • Easily expandable to 4 … 20 mA output (trend signal)

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Dusty – Compact sensor for filter damage monitoring

    Dusty – Compact sensor for filter damage monitoring

    Dusty Compact sensor for filter damage monitoring is a compact sensor for filter monitoring

    • Detects all dust types
    • Can be used in all purge gas and dust ducts
    • Immediate detection of filter damages
    • Simple commissioning (Plug & Play)
    • Prevention of process-induced dust Ex zones
    • Individual choice of alarm threshold
    • Rapid and easy retrofitting
    • 4 … 20 mA output at sensor

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    AirSafe – Continuous dust monitoring in ambient air

    AirSafe – Continuous dust monitoring in ambient air

    Monitoring of dust concentration in control system areas, silo areas, boiler houses or workstations.

    • The creation of dust explosion zones can be prevented.
    • Dust concentrations at workstations are safely monitored.
    • Possible dust escapes from system parts is quickly detected.
    • AirSafe can be used as early detection for dust which could endanger the workplace.
    • Also for applications in zone 22 dust.

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Dust detection – ProSens

    Dust detection – ProSens

    The dust detection ProSens was specially developed to carry out reliable dust measurement on clean sides after filters.

    • Dust measurement also in large channel diameters
    • Output of dust concentration as absolute value
    • ATEX-certified
    • Measurement of dust concentration at high temperatures
    • Trend signal or absolute value

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Sensor calibration using the Dosed-Reference-Method

    Sensor calibration using the Dosed-Reference-Method

    The measurement result of the sensor is only as good
    as the reference to which it has been calibrated.”

    For this reason we have developed the dosed-reference-method
    as an alternative to isokinetic dust sampling.
    The main basic idea of this is that a mass flow is dosed into the system
    which corresponds to a required concentration at a specific flow velocity.

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Speed measurement for solids – SpeedFlow

    Speed measurement for solids – SpeedFlow

    Speed measurement for solids

    • Usable in free fall and in pneumatics
    • Continuous speed measurement of solids (powder, granules, dust ) in metal pipes
    • Measurement directly in the conveying stream / entrained flow
    • Measurement is completely independent of material
    • Simple retrofitting using a welding socket

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Screen break detection

    Screen break detection

    Screen break detection Paddy is a particle sensor for on-line monitoring of coarse grain in the flow. If multiplied coarse particles are detected in the product flow, an alarm is given.

    • Monitoring of the material flow regarding the presence of oversized particles
    • Uses state-of-the-art microwave technology in combination with intelligent evaluation software
    • Can be installed in free-fall pipes downstream from screening or grinding systems
    • The possibility of a trend showing for grain size
    • Fast detection of coarse particles, for as little as 10 % of the mass flow

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Level detection – ProGap s

    Level detection – ProGap s

    The level detection ProGap S Microwave barrier for the contactless detection
    of dry bulk solids in containers, piping or shafts

    • Absolute insensitive to material caking
    • Can be used up to a profile of 18 m (larger profiles on request)
    • Can be used with adapter up to 220 °C and 20 bar
    • With ceramic mounting, usable up to 1,000 °C
    • Usable in dust EX-zones
    • Signaling through relay switching
    • Detection through non-conductive walls
    • Extra short sensor with the separate analysis unit

    – Now with Filling-Signal-Suppression 

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Level detection – ProGap 2.0

    Level detection – ProGap 2.0

    The level detection ProGap 2.0 for contactless detection of dry bulk solids in containers,
    in pipes or in shafts

    • Simple and uncomplicated retrofitting
    • Reliable fill level and limit level detection
    • Detection through all non-conductive walls
    • With process adapter  up to 220 °C and 20 bar pressure possible
    • With ceramic mounting up to 1,000 °C possible
    • Absolutely insensitive to material cakings
    • Can be used up to a  profile of 25 m (larger profiles on request)
    • Compact device – no separate electronics
    • Signalling through relay switching
    • Can also be supplied in short housing with separate electronics

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Material flow monitoring – FlowJam

    Material flow monitoring – FlowJam

    Microwave detector for contactless monitoring
    of material flows for “flow” or “no flow”

    • Absolutely insensitive against material deposits
    • For any line diameter
    • With adapter, usable up to 220 °C and 20 bar
    • With ceramic mounting, usable up to 1,000 °C
    • Compact (no separate electronics)
    • Signalling through relay switching
    • Different sensitivity levels
    • Detection through all non-conductive walls
    • Can also be supplied with short housing and separate electronics
    • Detection of material clogging and material standstill

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Flow monitoring on air slides – Solid control

    Flow monitoring on air slides – Solid control

    Powdery products are transported in air slides in many industries. Until now it was not possible to continuously get information about the flow.

    • Contact-free
    • Microwaves to measure the filling height in the top box
    • 4 . . . 20 mA-trend signal for the flow rate
    • Fast recognition of Flow-/No Flow-conditions
    • Easy retrofitting

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,
  • Read more

    Material flow monitor with blockage detector

    Material flow monitor with blockage detector

    The material flow monitor with blockage detector FlowJam Plus is a logical development of the established FlowJam sensor which has proved its worth in thousands of applications:

    • rapid detection of material movement (Flow/NoFlow)
    • additional function “Detection of blockage” or “Material flow interruption”
    • operates without contact using microwaves
    • a particularly reliable device since microwaves can pass through material accumulations
    • measurement can be taken from outside all non-metallic tank walls, housings, hose lines or pipelines
    • can be used even in difficult conditions, in other words, high operating temperatures, and pressures and in the version for Atex zones (with the help of a process adapter)

    Manufactured by  

    CTH Industrial Controls can provide you with service and start-up assistance for SWR engineering.

    Categories: ,