CTH | Industrial controls

Hardy HI LPB ADVANTAGE® Series

Hardy compression load cells are durable and versatile designed with premium stainless or alloy steel materials. Used for the monitoring of weight using compression forces, Advantage load cells use true glass-to-metal hermetic sealing to deliver reliable protection to sensors in demanding industrial environments.

Manufactured by

CTH Industrial Controls can provide you with service and start up assistance for your Hardy Weight System.

Description

Click to rate this post!

[Total: 0 Average: 0]

Advantage Weigh Modules LPB

Hermetic Load Point/Weigh Module Assembly Compression

Medium Capacity HI BBH06 Sensors: 44 – 450 lbs. (20 – 200kg)

The Hardy HI LPB ADVANTAGE® Series, sliding load point/weigh module system is designed for use on light to medium capacity vessels. Each weigh module consists of mounting hardware and HI BBH06 stainless steel mV/V and mV/V/ohm matched load sensor with true hermetic sealing, C2® Electronic Calibration capabilities, onboard electronic certs, a ¼ NPT conduit adapter and ten feet of cable.

Each pre-assembled, low profile load point system provides lift off protection and consists of three mount types specifically designed to eliminate the effects of unwanted forces to provide exceptional accuracy. The assembly can be positioned 360 degrees in ninety degree steps. A grounding strap and fixed color code wiring label is provided with each load cell HI BBH06 sensor. The mounting hardware is available in either stainless or zinc plated steel. The sensors have an IP rating of IP68/IP69K.

The HI LPB is available in the following standard capacities: 44 lbs, 110 lbs, 225 lbs, 450 lbs, and come fully assembled with shipping bracket for protection.

Hardy also offers Dummy load cells that have the same mounting and load introduction as the cell it replaces. These are used as intermediate place holders in weighing systems that are being worked on (i.e. welding, painting and moving vessels), and those that require input and output apparatuses in any given application. These are usually used in self aligning load points that require dry runs of the system prior to complete operation.

Welding fixtures are temporary fixtures used during alignment and welding. Welding Fixtures have the same dimensions and bolting pattern as the load point being installed.

Documentation
Hardy Advantage Compression Low Capacity HI LPB